Advance acoustic XI 21, Руководство пользователя

Страница: 30 / 46

Mini-Ribs C-Wires Leading-Edge-Wires
Packing
General
The XI should be packed cell on cell. There are various methods. We
recommend the following: First gather the cells at the leading edge,
beginning at the wing centre. Collect one side to the centre, then the
other side. Make sure that the Rigid Foils (wires) of the leading edge
lie as flat as possible on each other and (important) at the same height.
This will ensure that all leading edge wires will automatically be at the
same level (important for later folding). Then follow the same process
at the trailing edge – except that the ends of these cells will not be at
the same level because of the elliptical shape of the wing – the ribs get
shorter as the wingtips are approached. Do not disturb the positions of
the leading edge and C-wires – already carefully gathered.
Now turn the collected left and right lanes over into the centre, then
fold one over the other. Regularly change the position of this final cre-
ase to save wear on the same lane.
Now fold the paraglider to the width of the inner bag as usual (see pic.):
fold the trailing edge in, at the ends of the C-wires, and then the lea-
ding edge, below the rigid foils. Finally fold the leading edge half over
the lower section. First fold in the mini-rib section of the trailing
edge, Now fold the paraglider to the width of the inner bag as usual
(see pic.): fold the trailing edge in, at the ends of the C-wires, and then
the leading edge, below the rigid foils. Finally fold the leading edge half
over the lower section. then fold the leading edge bundle over, below
ends of the leading edge wires.
Finally fold the leading edge half
over the trailing edge end of the package. Be aware that careless pa-
cking will shorten your XI’s life. Do not leave the wing unnecessarily
in the sun, and never subject it to large temperature changes. Always
store your XI in a dry place. As for all paragliders, avoid excessive com-
pression and extra-tight packing. Finally fold the leading edge half over
the trailing edge end of the package. Be aware that careless packing
30