Advance acoustic TEXSILO 120, Инструкция по сборке, использованию и обслуживанию

Страница: 10 / 20

Fuel storage tank
10
17/05/22 Rev:1.0.2
4
- Fit the two pillars previously assembled using a beam and fi xing it with 4 TTQ M 8 screws
on the lower joints as shown in fi gure 4.
Now install also the upper beam by fi xing it with four TTQ M 8 screws to the relative joints,
taking care to install in the same time also the inner reinforcement plates as shown in fi gure 5
3
- Insert the lower support at the base of each pillar fi xing it using two washers and a cot-
ter pin as shown in fi gure 3.1, then fold the two sides of the cotter pin as shown in fi gure 3.2
Figure 3.1
Cotter pin
insertion
Cotter pin
fi xing
Figure 4 Figure 5
Figure 3.2