PREPARATION BEFORE USING
Step 4: Installation of legrest unit
Install the inner cover and outer cover of leg frame onto the connecting shaft.
Remove the screw on leg connecting buckle of the frame and open the buckle upwards,
then put the leg units into the buckle groove of the frame. Close the buckle and fix it with
bolt.
Lift the leg units, plug the three connectors from leg frame into the three ports under
the seats, and make sure they are well connected. (See the fig below)
Connect the wrinkle cover of the leg massage units with the magic tape on the seat
cloth.
Inner cover
Outer cover
Connecting buckle
Screw
Airpipe
Air Tap
Air valve port
Extention port
Air valve
connector
Extention connector
40
Содержание HS8860
Страница 51: ......
