ADTRAN TRACER 2xT1, Руководство пользователя

Страница: 43 / 65

TRACER 2xT1 User’s Manual
61280003L2-1B
Section 3 Operation
32 Preliminary
TRACER Alarm Page
Site: Adtran
Code Sync Alarm Off
Carrier Sync Alarm Off
T1Mux Framer Alarm Off
T1A T1B
RX LOS (Red) Alarm Off Off
RX AIS (Blue) Alarm Off Off
RX Yellow Alarm Off Off
BPV Alarm Off Off
TX AIS (Blue) Alarm Off Off
=====================================================================
Press ‘m’ for Main Menu:
Figure 3-9. Alarm Page
Channel B Statistics Page
This screen presents detailed error statistics for T1B. The data is presented as Errored Seconds and
Severely Errored Seconds. The counts for the most recent 24 hours are recorded in 15-minute
increments. Twenty-four-hour totals are recorded for the most recent days.
Alarm Page
This screen presents alarm information for the system. The T1A or T1B alarms are described in the
chapter entitled “Troubleshooting.” If any of the T1A or T1B alarms are active, a minor alarm will be
indicated at the alarm contacts. The RF link alarm will be activated when communication between the
BBP and the RFC has failed. Code Sync, Carrier Sync, and T1 Mux Framer alarms indicate that various
portions of the spread spectrum data pump are not operating. Any of these alarms will cause a major
alarm to be activated at the alarm contacts.
Figure 3-8. Channel B Statistics Page
TRACER T1B Performance History
Site: Adtran
24 Hour Registers 15 Minute Registers
---ES---SES-- --ES-SES----------ES-SES-
00000 00000 <-- Current --> 000 000
-1: ----- ----- - 1: --- --- -17: --- ---
-2: ----- ----- - 2: --- --- -18: --- ---
-3: ----- ----- - 3: --- --- -19: --- ---
-4: ----- ----- - 4: --- --- -20: --- ---
-5: ----- ----- - 5: --- --- -21: --- ---
-6: ----- ----- - 6: --- --- -22: --- ---
-7: ----- ----- - 7: --- --- -23: --- ---
- 8: --- --- -24: --- ---
- 9: --- --- -25: --- ---
- 10: --- --- -26: --- ---
- 11: --- --- -27: --- ---
- 12: --- --- -28: --- ---
- 13: --- --- -29: --- ---
- 14: --- --- -30: --- ---
- 15: --- --- -31: --- ---
- 16: --- --- -32: --- ---
===============================================================================
Press ‘m’ - Main menu, ‘p’ - Prev pg, ‘n’ - Next pg: