ADTRAN TOTAL ACCESS 600R, Системное руководство

Страница: 38 / 196

Section 4 User Interface Guide Total Access 600R System Manual
38 © 2002 ADTRAN, Inc. 61200600L1-1A
1. NAVIGATING THE TERMINAL MENU
Log in to the unit by connecting one end of the supplied silver cable to the RJ-45 interface labeled
CRAFT
(located on the rear of the unit) and the other to a RJ-45 to DB-9 adapter. Connect the DB-9 (female) to a
VT100 terminal or PC with VT100 emulator software. Configure the terminal settings for 9600 data rate,
no parity, 8 data bits, 1 stop bit, and no flow control.
After connecting to the unit and beginning a terminal session, a login screen appears. The default condition
for the unit is no password, so the user can just press enter at the Login prompt. (Refer to
DLP-002 ,
Logging in to the System, for detailed instructions.)
Terminal Menu Window
The unit uses a multi-level menu structure that contains both menu items and data fields. All menu items
and data fields display in the terminal menu window (see Figure 1), through which you have complete
control of the unit.
Figure 1. Top-Level Terminal Menu Window
Menu Path
The first line of the terminal menu window (the menu path) shows the session’s current position (path) in
the menu structure. For example, Figure 1 shows the top-level menu with the cursor on the
S
YSTEM
I
NFO
submenu; therefore, the menu path reads TA 600R/System Info .
Left Pane Right Pane
Status
Network
Tool Tip
System Time
Menu Path
Navigation Help
Extended Help