ADTRAN Total Access 1240 Скачать руководство пользователя страница 64

Страница: 64 / 146

Total Access 1240 Installation and Maintenance Practice

5-24

61179605L5-5B

Duplex Mode Menu

The Duplex Mode menu (see

Figure 5-17

) is used to select the duplex mode of the Ethernet

interface.

Figure 5-17. Duplex Mode Menu

NOTE

The duplex mode displayed in the title indicates the current duplex
mode being viewed or provisioned.

The Duplex Mode menu options are shown in

Table 5-14

Table 5-14. Duplex Mode Menu Options

Option

Description

Function

Auto Negotiate

This option sets the system to automatically detect the
duplex mode of the attached device.

Full Duplex

This option sets the Ethernet interface to transmit and
receive simultaneously.

Half Duplex

This option sets the Ethernet interface to transmit or
receive at a given time, but not simultaneously.

Total Access 1240 - IPoE Fed 09/01/05 03:44
Unacknowledged Alarms: None

Duplex Mode - Full Duplex

                          1. Auto Negotiate
                          2. Full Duplex
                          3. Half Duplex

Selection :

'?' - System Help Screen

Содержание Total Access 1240



















































































































































Результаты поиска

Содержание Total Access 1240

Отзывы:

ADTRAN Total Access 1240, Установка и эксплуатация, Страница: 64 / 146

Результаты поиска

Содержание Total Access 1240

Отзывы: