ADTRAN Total Access 1240 Скачать руководство пользователя страница 109

Страница: 109 / 146

Section 5, User Interface - Menu Descriptions

61179605L5-5B

5-69

Card Provisioning Menu

The Card Provisioning menu (see

Figure 5-49

) is used to set the service state of the main

circuit board card. The default value for the Card Service State is Out of Service-Maintenance.
Changes to this service state are reflected on all 24 ports.

Figure 5-49. Card Provisioning Menu

The Card Provisioning menu options are shown in

Table 5-50

Table 5-50. Card Provisioning Menu Options

Option

Description

Function

Service State

This option is used to select the card service state. The
available service states are as follows:

• In Service – The SHDSL services are available, if

installed, and Link Down and Threshold alarms are
reported.

• Out of Service-Unassigned – No SHDSL services are

available. No Link Down and Threshold alarms are
reported.

• Out of Service-Maintenance – SHDSL services are

available. No Link Down and Threshold alarms are
reported.

Restore Factory Defaults

This option displays the

“Restore Factory Defaults

Screen”

on page 5-70.

09/01/05 03:58

Total Access 1240

Card Provisioning

1. Service State = OOS-Maintenance
2. Restore Factory Defaults

Selection:

'?' - System Help

Содержание Total Access 1240



















































































































































Результаты поиска

Содержание Total Access 1240

Отзывы:

ADTRAN Total Access 1240, Установка и эксплуатация, Страница: 109 / 146

Результаты поиска

Содержание Total Access 1240

Отзывы: