background image

Section 5, User Interface - Menu Descriptions

61179605L5-5B

5-79

4

SES 15 Minute

This option is used to enable or disable the Severely 
Errored Second setting.
SES 15 minute threshold is a count of 1-second 
intervals during which at least 50 CRC anomalies are 
declared or one or more LOSW defects are declared. 50 
CRC anomalies during a 1-second interval are 
equivalent to a 30% errored frame rate for a nominal 
frame length.
The parameters for SES are 1 to 900 seconds.

5

UAS 15 Minute

This option is used to enable or disable the Unavailable 
Second setting.
UAS 15 minute threshold is a count of 1-second 
intervals for which the SHDSL line is unavailable. The 
SHDSL line becomes unavailable at the onset of 10 
contiguous SESs. The 10 SESs are included in the 
unavailable time. Once unavailable, the SHDSL line 
becomes available at the onset of 10 contiguous seconds 
with no SESs. The 10s with no SESs are excluded from 
unavailable time.
The parameters for UAS are 1 to 900 seconds.

6

LOSWS 15 Minute

This option is used to enable or disable the Loss of 
Synchronization Word Failure setting.
LOSWS 15 minute threshold is a count of 1-second 
intervals during which one or more SHDSL LOSW 
defects are declared.
The parameters for LOSWS are 1 to 900 seconds.

7

CVC 15 Minute

This option is used to enable or disable the Code 
Violation Count setting.
CVC 15 minute threshold is a count of the SHDSL CRC 
anomalies occurring during the accumulation period.
The parameters for CVC are 1 to 65535 errors.

Table 5-56.  SHDSL Loop 1 Alarm Threshold Menu Options (Continued)

Option

Alarm Threshold

Description

Содержание Total Access 1240



















































































































































Отзывы: