To begin configuring the T1 interface, click on ‘Physical Interfaces’ under
‘System’.
Next, click on ‘t1 0/2’ under the ‘Physical Interfaces’ list.
This will take you to the ‘T1 0/2’ Interface Configuration page. In the Description
box, you have the option of entering a label for the interface.
Next, you will want to check the ‘Enable’ box to enable the interface.
Click ‘Apply’ to apply the configuration above.
Since this will be an RBS interface, we want to reserve the T1 0/2 interface for an
RBS trunk by selecting ‘Reserve for RBS Trunks’ in the drop-down menu.
Specify the appropriate DS0 range using the drop-down boxes. When finished,
click the ‘Add’ button.
Note: This will create a specific TDM group for each DSO selected in the range.
If this is not the desired behavior, changes will need to be made via the
