ADTRAN SMART/RG SR506n, Руководство пользователя

Страница: 74 / 161

SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020 74
Field Name Description
Precedence Select the priority value to be associated with the new queue. Options vary by interface
type and include 1(SP - 4(SP) , 1(WRR/WFQ) - 7(WRR/WFQ) , and 8(WRR) .
Note: The lower the value, the higher the priority.
Scheduler Algorithm ( Not applicable for ETH interfaces ) Select an algorithm for applying queue data pri-
ority. Options are:
l
Strict Priority : Applies weighting based on the Priority field value.
l
Weighted Round Robin: Applies a fair round robin scheme weighting that is
effective for networks with fixed packet sizes, e.g., ATM networks.
l
Weighted Fair Queuing: Applies a fair queue weighting scheme by allowing dif-
ferent sessions to have different service shares for improved data packet flow in
networks with variable packet sizes, e.g., PTM/IP networks.
Queue Weight (
Not applicable for ETH interfaces
) Enter a weight for prioritizing this queue. Options
are
1
-
63
.
Minimum Rate ( Applicable for PTM and Dynamic WAN interfaces only ) Enter the minimum shaping rate
for packets in QoS queues. Options are 1 - 1255 kbps 1 - 100000 Kbps.
To specify no minimum rate, enter -1 .
Shaping Rate ( Applicable for PTM and Dynamic WAN interfaces only ) Enter the shaping rate for pack-
ets in QoS queues. Options are 1 - 1255 kbps 1 - 100000 Kbps.
To specify no shaping, enter -1 .
Shaping Burst Size ( Applicable for PTM and Dynamic WAN interfaces only ) Enter the shaping burst size to
be applied to packets in the defined queue. Options are 1600 bytes or greater.
PTM Priority
(
Applicable for PTM and Dynamic WAN interfaces only
) Select the priority for the PTM
interface. Options are
Low
and
High
.
Wlan Queue