Quick Start
Guide
Overview
This quick start guide describes how to install Adtran’s SDG CPE Wall Mount 1 mounting kit. This kit can be used with Adtran’s 814-v6, 825-v6, 834-5, and
854-6/v6 Service Delivery Gateways (SDGs).
Package Contents
■ Adtran’s SDG CPE Wall Mount 1 mounting bracket
■ Screws and wall anchors
Prior to Installation
Before installing the wall mount bracket, inspect it for damage. If damage has occurred during shipping, file a claim with the carrier, and then contact
Adtran Customer Support.
Required Tools
A #2 Phillips-head screwdriver, drill and 1/4” (6mm) drill bit are required for installing the SDG CPE Wall Mount 1 mounting bracket.
Installing the Wall Mount Kit
Decide on a location for the gateway you want to mount on a wall, and follow these steps:
1. Use the keyholes on the wall mount kit as a template and mark the wall accordingly. See
.
Figure 1. Wall Mount Installation Kit
WARNING!
f
Read all warnings, cautions, notes and installation instructions before installing or servicing this equipment.
Cover
Screws (4x)
Wall Mount
Wall Anchors (4x)
f
WARNING!
f
CAUTION!
g
NOTE
WARNING indicates a hazard which, if
not avoided, could result in death, injury
or serious property damage.
CAUTION indicates a hazard which, if not
avoided, could result in service interruption,
damage to the equipment, or minor property
damage.
NOTES inform the user of additional, but
important, information or features.
SDG CPE Wall Mount 1
SDG CPE Wall Mount Kit 1
June 2022
617600192F1-13A
P/N: 17600192F1
