NETVANTA SHDSL NETWORK INTERFACE MODULE
P/N 1200867L1
For more detailed documentation, visit us online at
www.adtran.com
Quick Start Guide
Quick Start Guide, 61200867L1-13B, February 2004
Technical Support 1-888-4ADTRAN or +1-256-963-8716
© 2004 ADTRAN, All Rights Reserved
WAN-SHDSL
DBU
An optional Dial Backup Interface Module (DIM) is
required for dial backup applications.
WAN-SHDSL N
ETWORK
(RJ-45) P
INOUT
Pin
Name
Description
1-3
— Unused
4
T
SHDSL Tip
5
R
SHDSL Ring
6-8
—
Unused
S
PECIFICATIONS
SHDSL Interface
Line rate: 200 to 2312 kbps in 64k
increments
ITU-T standards: G.991.2 SHDSL
Operating modes: line termination (CO)
and network termination (CPE)
Connector: RJ-45
Clock Source
CO operating mode: internal
CPE operating mode: network
Diagnostics
Test pattern generation and detection: 2
15
Network loopbacks (local and remote)
Alarm generation and detection
Programmable alarm threshold settings
for loop attenuation and signal-to-noise
ratio margin
Line Code
TC-PAM
I
NSTALLATION
I
NSTRUCTIONS
1. Remove power from the base unit.
2. Slide the Network Interface Module (NIM) into the
option slot until the NIM is firmly seated against the front
of the chassis.
3. Secure the pins at both edges of the NIM.
4. Connect the cables to the associated device(s).
5. Complete installation of the base unit.
6. Restore power to the base unit.
DBU (RJ-48C) P
INOUT
Pin
Name
Description
1-2
— Unused
3
R1
Network-Ring 1
4
R
Network-Ring
5
T
Network-Tip
6
T1
Network-Tip 1
7-8
—
Unused
