background image

Copyright © 2008 ADTRAN, Inc.

Configuring the

NetVanta 7000 Series 

for the IP 700 Series Phones

Quick Configuration Guide 

61200770E1-42C

November 2008

This quick configuration guide provides assistance in configuring the NetVanta 7000 Series 
product to operate with IP 700 Series phones. These instructions are only applicable to 
NetVanta 7000 Series products running AOS 14 firmware or newer. It is assumed that the 
NetVanta 7000 Series product has been configured as instructed in the quick start guide provided 
with your unit and hardware installation guide provided on the 

AOS Documentation

 CD. It also 

assumes that the IP 700 Series phones have been assembled per the instructions in the 
quick start guide provided with them.

The following sections provide step-by-step instructions for:

Configuring the DHCP server settings

Creating SIP accounts

Uploading configuration files

Phone setup

Enabling the Dynamic Host Configuration Protocol (DHCP) server on the NetVanta can be 
accomplished using either the command line interface (CLI) or the Web-based graphical user 
interface (GUI). Both sets of instructions are provided below. Choose the method that best suits 
your situation. 

The IP 700 Series phone uses site-specific Option 157 to provide the following information to the 
phones:

TftpServers=0.0.0.0
FtpServers=10.10.20.1:/ADTRAN
FtpLogin=polycomftp
FtpPassword=password 
Layer2Tagging=True 
VlanID=2

Configuring the DHCP Server Settings

Option 157 must be set on both the 

LAN_pool

 and the 

VoIP_pool

 to direct the 

phones to the correct boot server. 

If the voice virtual local area network (VLAN) address has been changed to 
something other than 

10.10.20.1

 for a particular NetVanta server, you will need to 

adjust the FtpServers address in the commands above.

Содержание NetVanta 7000 Series








Отзывы: