Compliance
■ This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
■ 1. This device may not cause harmful interference.
■ 2. This device must accept any interference received, including interference that may cause undesired operation.
■ Changes or modifications not expressly approved by ADTRAN could void the user's authority to operate this equipment.
■ This product is NRTL Listed to the applicable UL/CSA Standards. This product has also been evaluated to applicable international standards for CE marking
and RCM marking.
■ CAN ICES-003 (A)/NMB-003(A)
■ This product meets EU RoHS Directive and complies with the 2015/863/EU Restriction of Hazardous Substance Directive. Refer to
for further information on RoHS/WEEE.
■ This product complies with the UL/CUL and IEC/EN 62368-1: 2014 2nd Ed standards, as well as the AS/NZS 62368.1:2018 standards.
■ This product complies with the EU Code of Conduct on Energy Consumption of Broadband Equipment.
■ This product complies with ETSI EN 300 386 standards.
■ Changes or modifications not expressly approved by ADTRAN will void the warranty.
■ This equipment contains no parts that can be serviced by the user.
CAUTION!
f
CAUTION!
f
Electrostatic Discharge (ESD) can damage electronic devices. When handling devices, wear an antistatic discharge wrist strap to prevent damage to
electronic components. Place in antistatic packing material when transporting or storing. When installing or maintaining, always place devices on an
approved antistatic mat that is electrically grounded.
NOTE
g
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
The following configuration guides provide additional information for
this ADTRAN product (available online at
https://
supportcommunity.adtran.com
).
Configuring Layer 2 Services in ASE
Configuring MRP and MVRP in ASE
For ADTRAN training inquiries, visit:
Access additional safety information and product documentation using the QR code or
website.
https://supportcommunity.adtran.com
Warranty:
ADTRAN will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can be
found online at
Trademarks:
Brand names and product names included in this document are trademarks,
registered trademarks, or trade names of their respective holders.
Copyright © 2022 ADTRAN, Inc. All Rights Reserved.
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY
HANDLING PRECAUTIONS REQUIRED
*617101760PF1-13A*
ADTRAN CUSTOMER CARE:
From within the U.S. 1.888.423.8726
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
