ADTRAN NetVanta 1560-08-150W, Быстрый старт

Страница: 1 / 8

Quick Start
Overview
This quick start describes how to install, configure, and troubleshoot the NetVanta 1560-08-150W, 8-port Managed GbE 150W PoE+ Switch. Figures 1 and
2 show the Front and Rear Panel layouts of the switch.
■ “Installing the Switch”
on page 1
■ “Initially Configuring the Switch”
on page 4
■ “Power Over Ethernet (PoE)”
on page 6
■ “Understanding the Status LEDs”
on page 6
■ “Using the MODE Button”
on page 7
■ “Troubleshooting the Switch”
on page 7
Figure 1. Front Panel Layout
Figure 2. Rear Panel Layout
Installing the Switch
Package Contents
■ NetVanta 1560-08-150W switch
■ AC power cord
■ DB-9 to RJ-45 cable
■ Micro-USB to USB cable
■ Four adhesive rubber feet
■ Quick Start
f
WARNING!
The NetVanta 1560-08-150W is intended for indoor use only. Ethernet, PoE cables, and attached equipment are intended for use within
the same building with equipotential bonding, and not intended to be placed in separate buildings or structures. Failure to deploy as
described could result in permanent damage from lightning or other electrical events and voids the warranty.
NetVanta 1560-08-150W
SYSTEM
LNK/ACT/SPD
PoE
CONSOLE
USB MODE/RESET
1 2 3 4 5 6 7 8 9 10 9 10
PoE
Mode LED
MODE
Button
Port Status
LEDs
LINK/ACT/SPD
Mode LED
SYS
LED
CONSOLE
Port
10/100/1000
RJ-45 with PoE+
100/1000 RJ-45/SFP
Combo Ports
AC Line: 100-240V 50-60Hz
AC Line: 100-240V 50-60Hz
Power Connection
NetVanta 1560-08-150W
8-port Managed GbE 150W PoE+ Switch
March 2020
617108108PF2-13D
P/N: 17108108PF2