ADTRAN NetVanta 1000 Series, Руководство по установке оборудования

Страница: 29 / 48

NetVanta 1000 Series Switch Hardware Installation Guide Option Modules
61200500L1-34C © 2004 ADTRAN, Inc. 29
NetVanta Dual T1 NIM (P/N 1200872L1)
The NetVanta Dual T1 NIM (see Figure 10) provides two WAN T1 interfaces for the NetVanta. Refer to
Table A-6 on page 43 for the pinouts. Refer to Table A-11 on page 46 for the DBU connector pinout. An
optional DIM is required for dial backup applications.
Figure 10. NetVanta Dual T1 NIM
Features and Specifications
Operating Modes
• T1/ FT1
T1 Interface
• Line Rate: 1.544 Mbps +/- 75 bps
• Line Code: AMI or B8ZS
• Framing: D4 (SF) or ESF
• FT1 Line Rate: DS0 Channelized
(multiples of 64 kbps)
• Input Signal: 0 to -36 dB (DS-1)
• Line Build-Out: 0, -7.5, -15, -22.5 dB
• Connector: RJ-48C
• DS0 Assignment: Programmable
Clock Source
• Network
• Internal
• Through
Diagnostics
• Test pattern generation and detection:
QRSS, 2
15
-1, 2
20
-1, 511
• Network loopbacks (local and remote)
• Responds to both inband and FDL loop
codes
• Alarm generation detection
• Network performance data (15 minutes
and 24 hours)
Relevant Requirements/Standards
• EMC - see Electromagnetic
Compatibility (EMC) Table for the
NetVanta 1224STR/1224R
on page 6.
• ACTA/FCC Part 68
• Industry Canada CS03
• UL and CUL
• T1 Interface: Pub 62411
• ESF Format Interface: TR. 194
• ESF Performance Monitoring: TR. 54016
and T1.403
Environmental
• Operating temperature: 0 °C to 50 °C
• Storage Temperature: -40 °C to 85 °C
• Relative Humidity: Up to 95%
noncondensing
Physical
• Dimensions: 4.25” x 2.75”