background image

5. If entered correctly, a confirmation tone is played and the number is 

displayed on the phone’s caller-id display with the string 
“ACCEPTED”.

6. If programming is successful, the ONT plays a stutter dial tone and 

flashes the GPON LED green for approximately 10 seconds with a 
cadence of 300 milliseconds on/off before it continues its startup/
ranging process.

g

     NOTE

If a failure occurs, the ONT plays reorder tone and displays **Invalid** 
on the caller-id display. If the pattern is entered incorrectly, the caller-
id displays **Re-enter* if the first ID does not match the second.

Entering an invalid Registration ID, such as one with less than 10 
digits or non-matching values, results in a reorder tone and you have 
the same 10-second window to restart step 

3

 to allow you to re-enter 

codes that were entered incorrectly.

S

PECIFICATIONS

Electrical

Input Power Connection: UPS provided through 7-pin alarm connector

Voltage Range: 12 VDC nominal

Minimum Voltage: 10 V

Maximum Voltage: 16 V

Power Consumption: Less than 15 W

Optical

TX min power: 0.5 dBm

TX max power: 5.0 dBm

RSSI max sensitivity: –27.0 dBm

RX overload: –8.0 dBm

TX wavelength: 1310 nm typical

RX wavelength: 1490 nm typical

Physical

Height: 9.05 in. (23.0 cm)

Width: 8.66 in. (22.0 cm)

Depth: 1.38 in. (3.5 cm)

Weight: 3.5 lbs. (1.6 kg NID and ONT combined)

Environmental

Protected Equipment Environment (Outside)

Operational Temperature Range: –40°C to +65°C 
ambient with mechanical enclosure

Storage Temperature Range: –40°C to +85°C 

Relative Humidity: 95% (non-condensing)

M

AINTENANCE

The ONT does not require routine hardware maintenance for normal 
operation. ADTRAN does not recommend that repairs be attempted in the 
field. Repair services may be obtained by returning the defective unit to 
ADTRAN. Refer to the warranty for further information. Field support for 
software is provided through upgrade facilities.

S

AFETY

 

AND

 R

EGULATORY

Refer to the

 

Safety and Regulatory Notice for this product 

(P/N: 61287802F1C-17) for detailed safety and regulatory 
information.
Consultez l'avis sur la sécurité et la conformité à la réglementation pour ce 
produit (61287802F1C-17) pour obtenir des renseignements détaillés sur 
la sécurité et la réglementation.
Ausführliche Sicherheits- und regulatorische Informationen sind in der 
Konformitätserklärung zur Sicherheit und Einhaltung von Normen zu 
diesem Produkt (61287802F1C-17) aufgeführt.

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY

HANDLING PRECAUTIONS REQUIRED

Warranty:

ADTRAN will replace or repair this product within the warranty period if it does not 

meet its published specifications or fails while in service. Warranty information can be 

found online at 

www.adtran.com/warranty

.

Trademarks:

 Brand names and product names included in this document are trademarks, 

registered trademarks, or trade names of their respective holders.

Copyright © 2021 ADTRAN, Inc. All Rights Reserved.

ADTRAN CUSTOMER CARE:

From within the U.S.     1.888.423.8726

From outside the U.S. +1 256.963.8716

PRICING AND AVAILABILITY 1.800.827.0807

*61287802F1C-13A*

Documentation for ADTRAN Network Solutions products is available for 

viewing and download directly from the ADTRAN Support Community 

website. 
Go to: 

https://supportforums.adtran.com/welcome

Registration is required.
ADTRAN offers training courses on our products, including customized 

training and courses taught at our facilities or at customer sites.
For inquiries, go to:

 http://adtran.com/training

The following online documents and resources provide additional information for this product:
ADTRAN Pluggable Optics Compatibility Matrix 

(online tool, go to: 

http://www.adtran.com/pluggableoptics

)

GPON 352/374 Exterior Wall Mount ONT Compliance Notice

Содержание GPON TA352







Отзывы: