ADTRAN Express 4110 Скачать руководство пользователя страница 155 | Manualshive

Страница: 155 / 205

ADTRAN Express 4110 Скачать руководство пользователя страница 155

Appendix B. Log Messages

61200176L3-1

Express 4110/4120 User Manual

B-5

Peer failed CHAP authen

level 3

The PPP peer’s reported CHAP username and/or password does not
match the Express 4110/4120’s parameters. This is most likely caused by
PPP peer sending an incorrect username and/or password. Make sure
the Configuration/Connection List/Authentication parameters Rx User-
name

and Rx Password are correctly entered. Also, if using RADIUS,

check that the server is configured and running properly.

Peer failed EAP authen

level 3

The PPP peer’s reported EAP username and/or password does not
match the Express 4110/4120’s parameters. This is most likely caused by
PPP peer sending incorrect username and/or password. Make sure the
Configuration/Connection List/Authentication

parameters Rx User-

name

and Rx Password are correctly entered. Also, if using RADIUS,

check that the server is configured and running properly.

Peer failed PAP authen

level 3

The PPP peer’s reported PAP username and/or password does not
match the Express 4110/4120’s parameters. This is most likely caused by
PPP peer sending incorrect username and/or password. Make sure the
Configuration/Connection List/Authentication

parameters Rx User-

name

and Rx Password are correctly entered. Also, if using RADIUS,

check that the server is configured and running properly.

Peer refused authen

level 3

The PPP peer would not allow the Express 4110/4120 to authenticate it
using the method set in Configuration/Security/PPP.

Peer refused SpanTree

level 4

The PPP peer would not participate in the Spanning Tree protocol. This
is a warning message only. Bridging will still occur across the WAN port
so care must be taken that no loop topologies exist across the connection.

«
...
153
154
155
156
157
...
»

Содержание Express 4110














































































































































































































Отзывы:

Нет отзывов