background image

16    

Issue 5, February 2011

61213075L2-5E

Figure 14

 shows an active test pattern to the network. 

The error count display for the test pattern will count to 
and hold at 65535 errors. A loss of pattern sync will 
cause the count to increment to 65535. Reset the error 
count by selecting “Reset Pattern Errors”. If a test 
pattern is active to the network, then a pattern of 
unframed all “ones” is transmitted toward the customer.

The pattern that is sent can be selected using the Pattern 
Type option. Patterns available include 2^23-1, QRSS, 
Blue, Idle, and User Defined.

The following sequence is the factory default for the 
user defined pattern:

0000 0000 1111 1111

If a test pattern is active to the customer, then framed 
DS3 idle is transmitted toward the network. The 
Framing for Pattern option selects the framing for the 
test patterns for both the network and the customer, and 
it can be set to C-BIT, M13, or UNFR (unframed). The 
Timing Source for Pattern option selects whether the 
received network DS3 signal (NTWK) or the NIU3 PM 
local reference clock (LOCAL) will be used as the clock 
for the transmitted test pattern.

The timing source for the pattern is set to Network to 
preserve network timing. If a network signal is not 
present or if a loopback removes the timing reference 
from the network signal, local timing can be used for 
pattern testing.

Figure 14.  Loopback and Test Commands Screen, Pattern Active

CIRCUIT ID: xxxxxxx                                               03/01/04  13:04:03
                     Press ESC to return to previous menu

                          Loopback and Test Commands
             ______
Errs: 00000 | NIU3 |               1. Loopback Network
----------->|      |---------->    2. Loopback Customer
            |      |               3. Dual Loopback
            |      |
      NET   |      |  CUST         4. Send Pattern to Network
            |      |               5. Deactivate Pattern to Network
            |      |
 <--2^23-1--|      |<----------    6. Send Pattern to Customer
            |______|               7. Deactivate Pattern to Customer

                                   8. Pattern Type                     2^23-1
                                   9. Framing for Pattern              C-BIT
                                  10. Timing Source for Pattern        LOCAL
            Pattern                   
            Errors                11. Insert Bit Error
            -------               12. Reset Pattern Errors
Network      00000
Customer      N/A
                                  Selection:

Содержание DS3 NIU3 PM































Отзывы: