Quick Start Guide, 61700945F1-13B, February 2016
1
4
Copyright © 2016 ADTRAN, Inc. All Rights Reserved.
B
LUESOCKET
2020 S
ERIES
A
CCESS
P
OINT
P/N 1700945F1
H
ARDWARE
The following items are included in your shipment:
•
Bluesocket 2020 Series Access Point (BSAP)
•
One plastic wall/ceiling mounting bracket with hardware (two metal screw anchors, two long screws, two
short screws)
•
One flush/recessed ceiling T-rail mounting hardware kit (four T-rail clips (two sizes), two spacers, two long
screws, two short screws)
A
NTENNAS
The BSAP 2020 Series provides one integrated, four element high-efficiency Planar Inverted F Antenna (PIFA)
array with 3 dBi gain (no external antennas are required).
M
OUNTING THE
BSAP
TO A
C
EILING OR
W
ALL
BSAPs should be positioned for maximum throughput and range between other APs and wireless client
devices. Follow these instructions to mount the BSAP to an interior ceiling or wall using the enclosed ceiling/
wall mounting kit:
1.
Using the plastic mounting bracket as a template, mark the location to insert the screw anchors.
2.
Press the point of the screw anchors into the sheetrock at the marks and drive them into the wall using a
Phillips-head screwdriver.
3.
Insert the long screws through the recessed holes in the plastic mounting bracket and drive them into the
metal anchors.
4.
Drive the short screws into the metal screw receptacles on the bottom of the BSAP until they are firmly
seated in the receptacle. If extra space is required, use the spacers and long screws provided with the T-
rail mounting hardware kit to increase the space between the unit and the mounting bracket. Leave enough
of the long screws exposed above the spacer to ensure they can be inserted into the keyed slots on the
mounting bracket.
5.
Mount the BSAP on the mounting bracket by inserting the screws on the back of the BSAP into the keyed
slots on the mounting bracket and rotating the unit clockwise 90 degrees to secure it on the bracket.
6.
Optionally, protect your BSAP with a Kensington cable lock (not provided) inserted into the security slot.
Make a note of the 12-character MAC address and serial number listed on the back of
the BSAP 2020 Series before mounting the BSAP to a wall or other surface. This
information will be required during configuration.
Ethernet
12V DC
LEDs
Kensington Security
Slot
Optional
12 VDC
Power Port
Ethernet
Port
Mounting Screw
Receptacles
C
ONFIGURING THE
A
PPLICATION
More detailed documentation for configuring the BSAP 2020 Series is provided in the
https://supportforums.adtran.com
BSAP 2020 S
ERIES
LED D
ESCRIPTION
FCC R
ADIO
F
REQUENCY
I
NTERFERENCE
This device complies with Part 15 of the Federal Communications Commission (FCC) rules. The operation of
this device is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference that may cause undesired
operation.
T
HIRD
-P
ARTY
S
OFTWARE
The software included in the Bluesocket 2020 Series contains copyrighted software that is licensed under the
GNU General Public License (GPL). For a list of third-party software and their licenses, go to
http://www.adtran.com/software/EULA
. You can obtain the complete corresponding source code of such
software components from ADTRAN for a period of three years after our last shipment of this product by
sending a money order or check for $5 to:
ADTRAN, Inc, P.O. Box 933638, Atlanta, GA 31193-3638
Please write
GPL Source for product Bluesocket 2020 Series
in the memo line of your payment.
This offer is valid to anyone in receipt of this information.
BSAP State
Status
Ethernet
Radio
Boot Loader Initialization
Off
Off
Solid Orange
Operating System
Initialization
Solid Green
Off
Off
LAN Initialization
Flashing Green
Flashing Orange
Off
Discovering vWLAN
Flashing Green
Flashing Green
Off
Firmware Upgrade
(download)
Off
Flashing Green
Flashing Orange (Slow)
Firmware Upgrade (writing
or verifying)
Off
Flashing Green
Flashing Orange (Fast)
Firmware Upgrade
Complete
Off
Flashing Green
Solid Orange
Operational with No
Activity on Radios
Solid Green
Flashing Green
Solid Green
Operational with Activity on
Radios
Solid Green
Flashing Green
Flashing Green
Additional safety and regulatory guidelines are given in the document
https://supportforums.adtran.com
.
