Quick Start
D
ESCRIPTION
The following products are supported in this document:
The Active Optical Cable (AOC) Quad Small Form Pluggable
(AOC QSFP28) is a multimode fiber cable with optical trans-
ceivers on both ends that is used to create optical links of up to
100 GB/s.
The AOC QSFP28 provides full duplex and parallel interconnects:
4 transmitting / 4 receiving data lanes.
Part Number
Description
1445019F3C
QSFP28 100G 3M
1445019F10C
QSFP28 100G10M
1445019F15C
QSFP28 100G 15M
1445019F20C
QSFP28 100G 20M
1445019F30C
QSFP28 100G 30M
1445019F50C
QSFP28 100G 50M
1445019F100C
QSFP28 100G 100M
I
NSTALLATION
To install the AOC QSFP28 into an appropriate module, complete
the following steps:
1. Inspect the AOC QSFP28. If damaged, file a claim with the
carrier and then contact ADTRAN Customer Service.
2. Do not remove the protective end cap from the QSFP until
the fiber optic cable is ready to be connected.
3. Insert the AOC QSFP28 into the QSFP cage on the module.
Ensure the manufacturer’s label on the QSFP is facing
upward for correct installation.
4. Slide the AOC QSFP28 all the way into the receptacle until
there is an audible “click.”
f
CAUTION!
Due to compliance certification requirements, use only QSFPs
supplied by ADTRAN. ADTRAN cannot certify system integrity
with other QSFPs.
w
NOTICE
The loop on the QSFP is used to remove the QSFP from the cage
on the circuit card.
ADTRAN Pluggable Optics
AOC
AOC QSFP28 100G
May 2017
61445019F3C-13A
P/N: 1445019F3C
