ADTRAN Aastra 9133i IP Скачать руководство пользователя страница 17

Страница: 17 / 31

Aastra Model 9133i IP Phone Features

619500103-1A

To configure phone-wide call forwarding from the Aastra Web UI

Select Basic Settings > Call Forward.

In the Mode field, select the mode you want to set on your phone.

In the Number field, enter the call forward number for which you want your calls to be call
forwarded.

In the Number of Rings field, enter the number of rings you want to set before the call is forwarded.

Valid values are 1 to 9.

Select Save Settings to save the Call Forward settings.

The changes are dynamic and are immediately applied to the phone.

To configure per-line call forwarding settings from the Aastra Web UI

Select a line on which you want to set Call Forwarding.

In the Mode field, select the mode you want to set on the line.

In the Forward Number field, enter the call forward number for which you want your calls on this
line to be call forwarded.

In the Number of Rings field, select the number of rings on the line before the call is forwarded.

Valid values are 1 to 9.

Select Save Settings to save the Call Forward settings.

The changes are dynamic and are immediately applied to the phone.

2.11 Changing the Volume

To change the ringer volume setting, press the volume button when the phone is on-hook and idle.

2.12 Setting Do Not Disturb

The system administrator can set a softkey to “Do not Disturb” (DND).

To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the
phone number in the Number field.

To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the
phone number in the Forward Number field.

To force a line to use the global settings, set the Mode field to Global.

Содержание Aastra 9133i IP





























Результаты поиска

Содержание Aastra 9133i IP

Отзывы:

Похожие инструкции для Aastra 9133i IP

Бренды по названию

Популярные бренды

ADTRAN Aastra 9133i IP, Руководство пользователя

Результаты поиска

Содержание Aastra 9133i IP

Отзывы:

Похожие инструкции для Aastra 9133i IP

Бренды по названию

Популярные бренды