ADTRAN 6304W, Руководство по настройке

Страница: 55 / 66

6304W Installation Guide
7
CHAPTER 4
Installing the ONU
This chapter provides instructions on how to install the ONU.
Connecting the Fiber
Before connecting the product to the fiber, you need to install the fiber. Follow these
steps to install the fiber.
1
Remove the dust cap from the optical interface.
2
Insert the fiber into the flange plate.
3
Connect the fiber from the flange plate to the optical interface on the wall.
Note
•
When a fiber is not in use, cover the optical interface of the ONU and put the dust
cap back on the optical fiber. Prevent dust pollution or water immersion, as this
may cause damage to the fiber and optical interface of the ONU.
• If fibers need to be fixed during parallel cabling, do not fasten the fibers too tightly.
Avoid fiber extrusion, as this may cause fiber damage.