Physical Description
TA 900 Series (3rd Gen) HIG
14
Copyright © 2020 ADTRAN, Inc.
61213908F1-34A
Reviewing the Rear Panel Design
shows the 3rd Gen Total Access 900 Series’ rear panel layouts.
Figure 2. Total Access 900 Series Rear Panel Layouts
Rear Panel Interfaces
VOICE Connection
A single 50-pin female amphenol connector, labeled
VOICE
, provides the interconnect wiring
for the analog FXS and FXO circuits (FXO is available as an option only on the Total Access
924). See
VOICE
connector pin assignments.
DSX-1 Interface
The
DSX-1 T1 0/2
interface is a DSX-1 RJ-48C pin connection. See
the DSX-1 network interface pinouts.
Network Interface
The
NET T1 0/1
interface is a DS1 RJ-48C pin connection. See
network interface pinouts.
10/100/1000Base-T Ethernet Interface and Activity LEDs
The Ethernet port (
ETH 0/1
) is an RJ-45 connector with LEDs. The amber activity LED flashes
when data traffic is being sent or received on the Ethernet port. The green link LED is on
The Total Access 908 only uses circuits 1 through 8. The Total Access 916 only
uses circuits 1 through 16. The Total Access 924 uses circuits 1 through 24, and
the FXO interfaces are on circuits 17 through 24.
ETH
ETH
Total Access 908
Total Access 916/924