ADTRAN 1200263L1-1.2A, Руководство пользователя

Страница: 21 / 33

61200263L1-1.2A ATLAS Router User Manual 4-1
Chapter 4
Configuration Overview and
Examples
This chapter provides several step-by-step examples to help you configure your
ATLAS. Figure 4-1 illustrates an ATLAS configured for the Router option.
Figure 4-1. ATLAS Configured for the Router Option
The general procedure for configuring the ATLAS depicted in Figure 4-1 is as fol-
lows:
1. From
Packet Manager/Packet Endpnts/Config
, create the frame relay packet
endpoint. Refer to the Frame Relay User Manual for more information.
2. From
Packet Manager/Packet Endpnts/Config/Sublinks
, create the necessary
PVCs.
3. From
Packet Manager/Packet Cncts
, connect the frame relay endpoint to the
Router.
4. From
Dedicated Map
, connect the frame relay packet endpoint to the appropri-
ate physical interface.
5. From
Router/IP/Interfaces
, enable routing on the interface.
6. (Optional) Configure any static routes that might be required.
Specific configuration examples included in this chapter are as follows:
• IP Routing Network—ATLAS as the Central-Site Router . . . . . . . . . . . . pg. 4-2
Frame Relay
Network
IP
10BaseT Router
Pkt
Endpoint 1
T1
Port
10.100.20.0