ADTRAN 1200218L1, Руководство пользователя

Страница: 40 / 122

Chapter 3. Configuration
3-2 OSU 300 User Manual 61200663L1-1
DS3 NETWORK
To access the network configuration parameters, select 1- DS3
N
ETWORK
. Configure the OSU 300 network settings to match the T3
signal received from the service provider. During remote
configuration, this menu is read-only. The
DS3 N
ETWORK
C
ONFIGURATION
menu is shown in Figure 3-2. Descriptions of the
DS3 N
ETWORK
fields follow the figure.
Figure 3-2. DS3 Network Configuration Menu
DS3 Timing
Set the timing to
L
OOP
if the OSU 300 is to derive timing from the
network; set to
L
OCAL
if the unit is to be the master timing source
for the circuit.
Remote Auto-Configuration
This feature allows one OSU 300 (set to
M
ASTER
) to automatically
relay its DTE port bandwidth configuration to a second unit (set to
S
LAVE
). If desired, the feature can be disabled by either unit.
XCV Threshold
Sets the threshold for code violations. Options include
1)D
ISABLED
,
2)1E-3
,
3)1E-4
,
4)1E-5
, and
5)1E-6
.