ADTRAN 1200186L2, Руководство пользователя

Страница: 30 / 36

Appendix A. Dial Plan Interface Configuration
A-2 Octal BRI/U User Manual 61200186L2-1
S
WITCH
T
YPE
Write security: 2; Read security: 5
Defines the type of ISDN switch to which the port is connected. If con-
nected to another ATLAS, both need to be set to the same switch type.
Choices include the following:
• Lucent 5E
• Northern DMS 100
• National-ISDN
SPID L
IST
Write security: 2; Read security: 5
Defines to ATLAS the parameters,
P
HONE
N
UMBER
and SPID N
UMBER
. To
properly operate with a network (PSTN) ISDN switch, the BRI interface
must have Service Profile Identifiers (SPIDs) and phone number(s) that
match the SPID(s) and phone number(s) which have been programmed into
the ISDN switch for this line. Each BRI may have one or more phone num-
bers and SPIDs.
P
HONE
N
UMBER
The phone number(s) assigned to this BRI phone line.
SPID N
UMBER
The SPID number(s) that matches the SPID number(s) which have been set
in the network’s ISDN switch (or in the PBX) for this BRI line. A SPID must
be entered for each phone number.
C
ALLS
The number of calls (1 or 2) which can be received or sent on this number/
SPID.
D64, D56, A
UDIO
,
S
PEECH
These options reflect what the network has provisioned for this SPID. If the
BRI was purchased with different services provisioned for the SPIDs, then
the call must match the services supported.