ADTRAN 1200182L1, Руководство пользователя

Страница: 34 / 50

Appendix A. Dial Plan Interface Configuration Async-232 Module Interface Configuration
A-2 Async-232 Module User Manual 61200182L1-1
When you are working in the User Termination section of the Dial Plan menu and
the Slot is defined as an Async-232 Module, the following Interface Configuration
options are available:
Ports Available
Indicates which of the Async-232 Module’s 16 ports have already been defined in
another switched end point (indicated by “s”). Ports which are defined in the cur-
rent switched end point are indicated with “!”. Available ports are indicated by a
single digit number representing the last digit of the port number.
Number of Ports
Defines to ATLAS how many of the ports are available to answer calls to the num-
ber(s) defined in the Incoming Number Accept list. You can enter numbers 1
through 16. The ports are contiguous, beginning with the Port number selected
and continuing through the number of ports selected.
Example:
If the port selected (as part of the Slot/Port selection) is 8, and the Number of
Ports selected is 8, then ports 8 through 15 are enabled to receive calls to the
numbers listed under the Incoming Call Accept list (see Figure A-2).
Figure A-2. Sample Dial Plan
Source ID
Identifies a unique ID type for this end point. This field simplifies the creation of
a Dial Plan in applications where the criteria for switching calls to a certain end
point is a function of which end point originated the call.
• Source IDs can range from 0 to 9.
• Default value = 0. The default ID for all end points is 0 (zero). With default
values, all calls are routed based on dialed numbers only.
• Multiple end points can have the same Source ID.
• When creating the Call Accept list, specify a Source ID(s) as well as a dialed
number or range of dialed numbers to accept.
Example:
An application requires that all calls originating from Port 1 of the Async-232
Module in Slot 1 be switched to Port 4 of that same module. Assign a unique