ADT Safewatch, Руководство пользователя

Страница: 28 / 56

– 28 –
USER FUNCTIONS
Remote Phone Control Feature
Enter:
(within eight seconds)
Your user code
Upon entering remote phone control mode the ADT Safewatch

QuickConnect
Security System will
announce “System, enter code”.
Remote Phone Control Commands
To remotely disarm system:
+ [1]
Your user code
To remotely arm in AWAY mode:
+ [2]
Your user code
To remotely arm in STAY mode:
+ [3]
Your user code
To remotely Bypass zones:
+ [6] + zone no.
Your user code
To remotely activate Forced Bypass:
+ [6] + [#]
Your user code
To remotely check system status: [
✻
]
To end remote phone session:
Hang Up or + [9]
Your user code
NOTES : (1) Check with your installer to see if the Forced Bypass mode has been enabled.
(2) When bypassing zones, make sure a confirmation beep sounds for each zone that has been bypassed.