Security Codes
You can program up to 6 additional user codes.
To add a user, enter the [Master code] + [CODE] + [new user number] + [new user code].
To erase a user, enter the [Master code] + [CODE] + [user number] and wait approximately three
seconds for the keypad to beep and verify.
Some user numbers have already been programmed:
Pre-programmed User
Function
User Number
Installer
All functions
[1]
Master
All functions
[2]
Babysitter
Only arm the system.
[7]
Duress
Secretly notifies the
monitoring center of duress.
[8]
For a complete list of User Code Attributes, please see the
Safewatch Quick Connect Plus system manual.
Trouble Conditions
When a trouble condition is detected, the word ‘FAULT’ will be displayed on the panel.
The existing Trouble Condition keyword will appear on the display.
To silence the Trouble Condition beeps, enter your [security code] + [OFF].
For a list of possible Trouble Conditions, please see the
Safewatch Quick Connect Plus system manual.
Volume
System announcements and status beep volume can be adjusted.
To adjust the volume level, press [FUNCTION] + [VOLUME] + [3]/[6].
[3] increases the volume by one level and [6] decreases the volume by one level.
