Hybrid Standalone NVR User Guide
The following describes the Detect window:
Enable
Check the box to enable the motion detection function. Then select a channel to be enabled from the
dropdown list.
Period
This feature activates the Motion Detection function in the specified time periods.
To set the Motion Detect period:
1.
Click the
Setup
button.
2.
In the resulting setup dialog (see Figure 4-42), select a day of the week from the drop-down
menu.
3.
For the selected day, check the box for one of the six 24-hour time periods and set the
corresponding recording range.
4.
Repeat for other time periods if desired.
5.
Click
Save
. The system reverts to the Motion Detect page.
Figure 4-42
Note:
•
Set the Motion Detect record period.
•
Navigate to
Storage > Schedule
to set the current channel as a scheduled recording.
Anti-dither
This feature sets a delay period before triggering the next Motion Detection event, to avoid re-
triggering on the same event. The delay period begins when the current motion detection event has
ended. The system only stores one event during the anti-dither period. The value ranges from 5s to
600s.
Sensitivity
There are six levels. The sixth level has the highest sensitivity.
NVR4200 Series User Guide
162
