User Guide
8
Galaxy 8/18/60/500/512
OMIT ZONES (User Level 3 and above)
PURPOSE
This option allows the user to omit zones before setting the system.
Zones must be eligible for omission otherwise they will not be
displayed.
NOTE:
Zones remain omitted for one set period only.
SELECTING OMIT ZONES
Enter the QUICK MENU. The 0=OMIT ZONES option is displayed.
Press the ent key to select this option.
VIEWING ELIGIBLE ZONES
When the OMIT ZONES option is selected the first zone eligible for
omission is displayed. The eligible zones can be viewed by pressing
the A> or <B keys. The zones eligible for omission can be rapidly
viewed by holding down either of these keys.
OMITTING ZONES
Once the zone to be omitted is shown on the display, press the # key.
The display indicates that the zone is omitted. A> and <B keys can
then be used to select other zones to be omitted using the same
method.
NOTE:
A zone is omitted from the system as soon as the # key is
pressed. The system does not have to be set for this to
come into effect.
SETTING WITH OMITTED ZONES
When the list of omitted zones is complete the setting routine is
started by pressing the ent key. The system starts to set and the
display indicates how many zones have been omitted. Alternatively
the esc key can be used to return to the menu options. Zones that
have been omitted remain omitted even after using the esc key.
NOTE:
All zones omitted are recorded in the log against the user.
GALAXY 512
The Galaxy 512 will allow a single eligible zone to be omitted from
the system. Once a zone has been omitted, it is not possible to view
other zones with the omit attribute enabled, until the omitted zone is
reinstated (either automatically or manually).
ZONES OMITTED
14:35 TUE 17 DEC
1 OMITTED
120
ent
#
ent
1004 SECURITY
OMITTED ENT=SET
0 = OMIT ZONES
[ent] to select
PIN + ent
1003 INTRUDER
#=OMIT ENT=SET
ent
1004 SECURITY
#=OMIT ENT=SET
>A
Technical Manuals Online! - http://www.tech-man.com
