Chapter 1 Introduction
Rear
Figure 2: Rear Panel
DC Power Input
Connect the supplied 12V power adapter here. Do not
use other power adapters; doing so may damage the
camera.
Power LED
(Green, Amber)
On (Green).
Power on.
Off.
No power.
Blinking (Green).
The Power LED blinks during start up
for approximately 1 minute.
Blinking (Amber).
The firmware is being upgraded.
On (Amber).
The firmware upgrade has failed.
Network/Wireless
LED
(Green, Amber)
On (Green).
Network connection is available (wired or
wireless).
Off.
Wired/wireless network is not connected or
camera is not sending/receiving data.
Blinking (Green).
Data is being transmitted or received
via the wired/wireless connection.
On (Amber).
If the LED is on for 5 seconds and then
turns off, the WPS function has failed.
Blinking (Amber).
The WPS connection is active.
Network Port
WPS/Reset Button
DC Power Input
Power LED
Network/Wireless LED
6
OC835-ADT Outdoor HD Camera Installation Guide
