ADT Pulse iHUB-3001B Скачать руководство пользователя страница 15

FCC Warning statement 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC RF Radiation Exposure Statement: 

1.

 

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

2.

 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment 

should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: 

-Reorient or relocate the receiving antenna. 

-Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

-Consult the dealer or an experienced radio/TV technician for help. 

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your 

authority to operate the equipment. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may 

not cause harmful interference and (2) this device must accept any interference received, including interference that may cause 

undesired operation

 

Содержание iHUB-3001B
















Отзывы: