adt-audio TM215b, Руководство пользователя

Страница: 9 / 10

adt-audio

ToolMod
®
Pro-Audio Module System
TM215b Stereo Mastering Peak-Limiter
9
(related to RMS value 22Hz-22kHz)
≥
125 dB without regulation @ 0 dB Gain, (related to dBA value)
Control Voltage
Rejection ≥ 70 dB
Threshold
Range + 20 dB to - 10 dB, (reference: + 6 dBu = 1.55 V ~ + 4 dBV)
0 dB position internally calibrated,
Vernier: Threshold fine control, ± 2 dB range, center click
Limit Ratio ≤
0.5 dB @ 10 dB Gain Reduction
Static Attack
frequency independent Regulation of the Attack Time
Range 20 µsec to 7 ms / 10 dB
LF-Attack
Attack Charasteric Modification in the LF Range
adjustable from Off to approx. 120 Hz
Response Time with Static Attack 20 µsec and LF-Attack OFF
8 µsec between the time the momentary value of an input signal in the
frequency range from 20 Hz to 20 kHz reaches the threshold to the time
the gain reduction reaches 6 dB
Static Release
Program independent Release Time Adjustment
Range 50 ms to 3 s for 10 dB Gain Change
Dynamic Release Longtime Integration with 0.1 sec Attack and adjustable Release Time.
Increases the static release time depending on the density of the signal
and the position of the dynamic release pot.
Display Gain reduction display with 5 LED‘s
Range from 1 dB to 10 dB
Bypass Hardbypass by Relay
*) The maximum current consumption is the current consumption under real-world operating con-
ditions; i.e. outputs loaded with > 5 k
Ω
at standard a/d or d/a converter levels of ~ + 18 dBu. If
the outputs are loaded with the minium load resistor of 1200 Ω and the output level is + 30 dBu
the current consumption increases by 30 mA per output. The standard current consumption should
be used to calculated the necessary capacity of the power supply unit.