MES9000 series
−
Instruction manual v1.1
15
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.8 Treatment and disposal of batteries
This device contains a lithium battery for supplying the system clock with power as long as the supply
voltage is not connected. The battery has a life cycle of 3-5 years depending on which load is applied.
The used battery should be disposed of in accordance with local legal regulations.
Recommendation for use:
To prevent unexpected plant downtime, as a precaution the CMOS battery should
be replaced within the scope of the maintenance plan (e.g. every 3 years).
•
For more information, see section 10.2 Replacing the CMOS battery
ATTENTION
Damage to the battery
Incorrect handling of the battery can cause it to be damaged or destroyed.
Lithium batteries should not be exposed to fire, soldered, recharged, opened, short-circuited,
reversed or heated above 100 °C and they should be disposed of properly as well as protected
against sunlight, humidity and condensation!
ATTENTION
Hazard due to thermal loads
The more the battery is exposed to higher temperatures, the faster it ages.
Operate the device within its specifications.
WARNING
Hazard due to explosion
Danger of explosion if using incorrect battery types.
Use the battery type recommended by the manufacturer.
