IPC9000 Serie
−
Instruction manual v1.1
23
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
6 Commissioning
6.1 Requirements
6.2 Switching on and configuring device
After connecting the power supply and monitor, the device can be started using the
ON/OFF button on top of the device.
The button has a blue LED and indicates the following states:
−
LED illuminated: device is on,
−
LED flashing: device is in the energy-saving state ("sleep").
After startup there is an icon on the Windows Desktop that can be used to call up the
ADS-TEC Configuration Center
.
Note
: as of 12/2020 preparation of the Configuration Center is still underway.
Important: To be able to configure settings, you will need to start the Configuration
Center with
administrator rights
(right-click with mouse and select "Run as
administrator" from the context menu).
The
Configuration Center
from ADS-TEC can be used to make a number of settings, e.g.:
−
Behaviour of the ON/OFF pushbutton
−
Disabling of the USB interfaces
−
Write-protection of the mass storage or parts of it
−
Soft keyboard
−
Wireless devices
−
Many other modules are in preparation
ATTENTION
Hazard due to condensation
Damage to electronic components caused by condensation resulting from temperature fluctuations.
•
Switch on the device only after it has acclimated to the ambient temperature.
