START-UP GUIDE
IMPORTANT - Read entire document and watch all associated videos before installing the ECHO
ECHO!
TM
Additional supplies to acquire from ADS before
setup and installation. Available for purchase on
the ADS storefront.
F
ADS bluetooth dongle
(P/N 9000-0061)
F
ADS Blue “set-up/activation/reset”
magnet (P/N 8000-0460)
Documentation for Installation
“ECHO
ECHO Start-up Guide”
to share this document with co-workers.
“ECHO
ECHO Quick Installation Guide”
to refer to while completing the
ECHO
field installation.
to configure and activate the
ECHO
with
Q
start
XML
.
ECHO Installation, Operation, and Maintenance Manual”
for detailed information
regarding installation, Intrinsically Safe (IS) certifications and maintenance restrictions.
These supplies come in the box with the basic
ECHO
ECHO kit.
(Different supplies may be included
based on the kit you ordered.)
F
ECHO
monitor
(Sim Card Pre-installed)
F
Hex key (P/N 509063)
F
ECHO
Quick Installation
Guide (included in box)
Make sure you have all the supplies and read all the materials before you begin.
Early steps must be completed BEFORE you attempt to install your ADS ECHO
ECHO in the field.
All digital ECHO
ECHO Guide Materials on One Convenient webpage
Visit
for quick access to all things
ECHO
in one place. The
ECHO
webpage houses all
ECHO
specific literature, documents, guides, FAQS, and videos.
Now Proceed to the Steps on page 2
SUPPLIES CHECKLIST!
DOWNLOADABLE MATERIALS
Download Software from www.adsenv.com/software-downloads
F
Download ADS
Q
start
XML
software
F
Download bluetooth driver
F
Antenna
(with 12ft (3.66m) cable P/N 9000-094)
(with 3ft (0.91m) cable P/N 9000-096)
F
Mounting bar (P/N 9000-0070)
or wall mount (P/N 8000-0484)
Additional general supplies to acquire
before field installation.
F
J-hook
F
Grade pole
F
Carpenter’s rule or tape measure
F
Rubber splicing tape
