ADS Technologies API-800, Руководство по установке, Страница: 4 / 21

Installation manual for the PYRO 1394/1394b Drive Kit, USB 2.0 Drive Kit & Dual-Link Drive Kit:
* Caution: Sharp metal parts inside. Care must be taken to prevent injury.
Drive Installation
STEP 1:
STEP 2:
Remove the black/grey plastic shell from the
Drive Kit case by pulling it away from the
front of the drive case.
Now remove the metal protective shield
from the top of the Drive Kit’s internal
module by sliding it away from the front of
the drive case.
STEP 3:
Set the Hard Drive or CD ROM drive’s jumper to “MASTER” or single drive setting
(Western Digital). For more information about jumper settings refer to the documentation
of the drive you are installing.
STEP 4:
For Hard Drive installation, connect the LED
activity light cable from the front of the Drive
Kit to its connector located towards the back
of the drive kit. Gently place the hard drive
on top of the black cable between the rails
that we have in the bottom of the drive kit.
For Optical Drive Installations, pop out the
front bezel and slide your drive in.
Connect the power supply cable from the
drive kit into the hard drive or optical drive
you are installing.
2
Drive Kit Installation Manual Drive Kit Installation Manual