Quick Start Guide ITC8113/TabX
Quick Start Guide ITC8113_DE_EN_DZ-HAND-93193-0/B
V1.2
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
1. Conformity
4. Wireless & tools
The manufacturer hereby declares that this device has been marked with the
CE mark in accordance with the basic requirements and other relevant
conditions of the following European Directives:
•
2011/65/EU, RoHs Directive
•
2014/30/EU, EMC Directive
•
2014/53/EU, RED Directive
•
2014/35/EU, Low Voltage Directive
The product is a class B device.
A corresponding EU conformity declaration is available for competent
authorities at the manufacturer and can be viewed upon request.
2.3 Battery charge state
Check the charge state of the batteries with the "Test Power" button before …
… you insert them into the battery slots. If there is a low charge capacity
(only the red LED illuminates), the provided power adapter is also to be
connected. The batteries are charged automatically as soon as the device is
connected to mains.
4.1 Configuration Center
If there is a preinstalled operating system on your device ex works, ADS-TEC
provides software modules. These software modules are specially matched to
the respective device and can be called up in the Configuration Center.
Additional information as well as detailed instructions
on the Configuration Center can be found in the
Download area of our website https://www.ads-tec.de
4.2 WLAN / Bluetooth
The device is equipped with a wireless LAN/Bluetooth card and can be
wirelessly integrated in any IT infrastructure.
The wireless card supports the following standards:
−
Wireless LAN 802.11 a/g/n
−
Bluetooth 4.0 Standard Class1 / Class2
4.3 UMTS / LTE (optional)
The device is equipped with a mobile communications module and is able to
communicate with the Internet even without a WLAN infrastructure.
The mobile communications module supports the
following standards:
−
UMTS (3G) / LTE (4G)
2. Open package
2.1 Scope of delivery
Check the contents of the package for any damages and for completeness::
−
1 x device
−
1 x power adapter 20 VDC
−
2 x stick-style battery
−
1 x Quick Start Guide
−
Optional: Accessories acc. to delivery note
2.2 Interfaces
All available interfaces are located on the side of the device. They are
protected by a rubber cover.
ATTENTION
Breaching of IP protection when the rubber covers are opened
Only open the rubber covers when using the interfaces.
3. Commissioning
3.1 ON/OFF pushbutton
Press the ON/OFF pushbutton until the device starts.
3.2 Operating system activation
Depending on the installed operating system, activation takes place
automatically or must be performed manually.
Beginning with Windows
®
8.1 Industry Pro, activation takes
place automatically.
All previous operating systems, such as Windows
®
7, must
be activated manually.
5. Documentation and drivers
Dear ADS-TEC Customer,
You can find all current documentation, drivers and
tools on our website www.ads-tec.de
Your ADS-TEC team
6. Safety instructions
ATTENTION
All installation work performed on the device must be performed
only under safe, secure and de-energised conditions.
While the service slot is open, the safety measures
for the handling of electrostatically sensitive components
are to be observed.
