Quick Start Guide ITC8113 / TabX
DZ-HAND-93193-0/C 2019-11-11
V1.3
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany
1. Safety
3. State of Charge
5. Wireless & Tools
Note:
This
quick start guide
serves to provide an overview of the
key steps during commissioning. Before beginning work, the
entire
instruction manual
must be read,
see
ATTENTION
Personal injuries and damage to property through
improper use
All installation and service work performed on the device must
be performed only under safe, secure and de-energised
conditions!
Always adhere to the safety measures applicable when
handling components at risk of being damaged by electrostatic
discharges in accordance with EN 61340-5-1/-2.
All available interfaces are located on the side of the device. They are protected
by a rubber cover.
ATTENTION
Breaching of IP protection when the rubber covers are opened
•
Only open the rubber covers when using the interfaces.
Check the contents of the package for any damages and for completeness:
−
1 x device
−
1 x power adapter 20 VDC
−
Stick-type batteries according to delivery note
−
1 x Quick Start Guide (this document)
−
Optional: Accessories acc. to delivery note
Battery charge state
Check the charge state of the batteries with the "Test Power" button before …
… you insert them into the battery slots. If there is a low charge capacity (only
the red LED illuminates), the provided power adapter is also to be connected.
The batteries are charged automatically as soon as the device is connected to
mains.
4.1 ON/OFF pushbutton
Press the ON/OFF pushbutton until the device starts.
4.2 Operating system
Windows® 7 Ultimate must be activated manually by entering the Product Key.
5.1 Configuration Center
If there is a preinstalled operating system on your device ex works, ADS-TEC
provides software modules. These software modules are specially matched to
the respective device and can be called up in the Configuration Center.
Additional information as well as detailed instructions
on the Configuration Center can be found in the
Download area of our website https://www.ads-tec.de
5.2 WIFI / Bluetooth
The device is equipped with a Wireless LAN/Bluetooth card and can be
wirelessly integrated in any IT infrastructure.
The wireless card supports the following standards:
−
Wireless LAN 802.11 a/g/n
−
Bluetooth 4.0 Standard Class1 / Class2
5.3 UMTS / LTE (optional)
The device is equipped with a mobile communications module and is able to
communicate with the Internet even without a WLAN infrastructure.
The mobile communications module supports the
following standards:
−
UMTS (3G) / LTE (4G)
2. Scope of delivery
4. Commissioning
