IRF1000 series
Instruction manual v1.3
26
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany
7.2 Manual configuration of the network adapter
Recommendation for use
:
The procedure described in the following was prepared using the Microsoft
Windows operating system as an example. If you are using another operating
system, the paths and properties described here may vary.
Open the properties of your network adapter. The path is as follows:
Network connections > LAN connection > Properties
(right mouse-key).
In the dialogue tab that appears, select option
: Internet protocol (TCP/IP)
and then click on
Properties
.
In the following window, select:
Use the following IP address
Access to the device is only enabled if the following parameters are entered as the fixed IP address or if
the computer is located in the same subnet space:
IP address: 192.168.0.100
Recommendation for use
:
The last set of digits must be a number between 1 and 253. In the example, "100"
has been selected.
Once the IP address has been entered, the
subnet mask address
must be entered. Click on the
Subnet mask
field and the correct address is entered automatically.
Subnet mask: 255.255.255.0
Confirm your entries by clicking on
OK
.
