
11
0
For A better Inspection Scope
09. Product Cleaning and Maintenance
10. Declaration
11. Attention
Before operating : Please use 75% alcohol to wipe.
After operating : Please use 75% alcohol to wipe.
Product maintenance : 3 years factory inspection.
The device would not apply to the warranty policy if the damage caused
The damaged caused due to user did not follow the operating instruction.
The manufacture and dealer would not be responsible for the data
damaged.
The user connected the other brand accessories with our device.
The damage caused by the accident or abuse (Including over working load).
The damage caused by incorrect storage way (Such as rodents,
Do not take the SD card out while taking photos or videos. That would
cause data lost or machine damage. A 80X or higher speed SD card is
recommend for better image performance. The system can support
Do not use the machine under an environment near inflammable or
Do not disassemble the machine by self, it may cause electric shock or
support SD/SDHC cards up to 32GB.
hazardous substances.
damage to the machine.
Beware of coiling the insertion tube for storage. Do not coil or bend
it too hard over 150 degree.
Do not touch the insertion tube lens since high temperature could be
produced after operating for a period of time.
Please use the accessories as the product attached. Otherwise this may
result in considerable damage to the machine.
Do not expose the product to direct sunlight.
Please store the product in a dry, well-ventilated place.
Do not suggest operating the device during charging the battery.
Please charge the battery for 8 hours to make sure the battery could be
full-of-charge. Or user could check the battery capacity instruction to
by the factors as below :
penetration of liquids).
show the battery condition.