PSR78 Repeater
User Manual V0.1
Page | 12
3.2 Switches and Ports
3.2.1 AC In Port
The AC In Port is designed to work with the power cable that is included with the system.
Figure 2: AC In Port
3.2.2 Battery Port
The PSR78 can be connected to an ADRF-BBU (ADRF Battery Backup) to provide power during a power failure.
If an ADRF-BBU is utilized, connect the ADRF-BBU to the PSR78 via the external battery port as shown in Figure
4.
Figure 3: Battery Backup Port
(WARNING: The circuit switch on the ADRF-BBU must be set to OFF before connecting the ADRF-BBU
to the PSR78 to prevent damage to the repeater or the ADRF-BBU and personal injury.)
Note: Please contact ADRF Technical Support for assistance if you are unfamiliar with the installation
procedure of our battery box.
3.2.3 Power Switch
The power switch is located on the inside of the repeater. Open the 2 latches on the side of the repeater to
open the top cover. Once opened, the power switch is located on the bottom left of the power supply.
Figure 4: Battery Backup Port
Содержание PSR78
Страница 19: ...PSR78 Repeater User Manual V0 1 Page 5 4 2 Status Tab 4 2 1 Status 700 MHz Status 700 MHz 4 2 2 Status 800 MHz ...
Страница 25: ...PSR78 Repeater User Manual V0 1 Page 11 4 4 Install Tab 4 4 1 Install 700MHz 800 MHz ...
Страница 36: ...PSR78 Repeater User Manual V0 1 Page 22 Appendix A Mechanical Drawing Figure 7 PSR78 mechanical drawing ...
