Advanced RF Technologies, Inc.
14
Fiber optic ports of the ADXD LPR emit invisible laser radiation at the 1270, 1330nm wavelength
window.
To avoid eye injury never look directly into the optical ports, patch cords or optical cables. Do not
stare into beam or view directly with optical instruments. Always assume optical output is on.
Only technicians familiar with fiber optic safety practices and procedures should perform optical
fiber connections and disconnections of the ADXD DAS and the associated cables.
The ADXD DAS complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser
notice No.50 (July26. 2001)@IEC 60825-1, Amendment2 (Jan. 2001).
Laser Safety
Do not remove the protective covers on the fiber optic connectors until a connection is ready to be
made. Do not leave connectors uncovered when not connected.
The tip of the fiber optic connectors should not come into contact with any object or dust.
Refer to the cleaning procedure for information on the cleaning of the fiber tip.
Care of Fiber Optic Connectors
Use of unauthorized antennas, cables, and/or coupling devices not conforming with
ERP/EIRP and/or indoor-only restrictions is prohibited.
Home/ personal use are prohibited
Only 50 ohm rated antennas, cables and passive equipment shall be used with this remote. Any
equipment attached to this device not meeting this standard may cause degradation and
unwanted signals in the bi-directional system. All components connected to this device must
operate in the frequency range of this device.
Only 50 ohm rated antennas, cables and passive components operating from 0.6 - 3 GHz shall
be used with this device.
Содержание ADXD-LPR
Страница 29: ...Advanced RF Technologies Inc 29 4 2 LPR 4 2 1 Wall Mount Figure 4 2 LPR Wall Mount Wall ...
Страница 31: ...Advanced RF Technologies Inc 31 Figure 5 1 HE Installation Procedure ...
Страница 55: ...Advanced RF Technologies Inc 55 8 MECHANICAL DRAWINGS 8 1 HE Figure 8 1 HE Drawing ...
Страница 56: ...Advanced RF Technologies Inc 56 8 2 LPR Figure 8 2 LPR Drawing ...