Adrenaline Amusements Spinner Frenzy SF-50-1001, Руководство по эксплуатации и обслуживанию

Страница: 23 / 61

Spinner Frenzy Manual V1.0
Chapter 06 – Service & repair
23 | P a g e
Troubleshooting
* NOTE: When requesting a warranty replacement you will be asked to
give the unit’s serial number from the back of the unit.
Video Troubleshooting
No Picture or Display
Problem
There could be loose or faulty connections between the monitor and the
VGA Splitter.
Make sure the VGA video cable is connected properly to the VGA Splitter.
Verify that the VGA video cable is properly connected between the VGA
splitter and the NUC computer.
If only 1 monitor doesn’t have signal, verify that the VGA cable is properly
connected to it. You will need to disassemble the front cabinet (Refer to
section Monitor Replacement).
Verify that the NUC Computer is powered on. There should be a blue LED on
the Power Button. If there is no LED, press the Power Button to start the
computer.
Audio Troubleshooting
Low Volume / No
Sound
Increase the volume in the game by pressing the Operator Button and
adjusting the volume options in the Operator Menu. You might also Quit the
game to Windows desktop and increase the volume via the Speaker icon
on the bottom right of your screen.
Verify the wirings behind the speakers and in the amplifier.
Verify that the 1/8’’ audio jack is plugged in the computer’s sound input jack
and that the other end RCA’s are plugged in the sound amplifier.