ADREL ALT-USB Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 11

ADREL ALT-USB Скачать руководство пользователя страница 4

4

4. Drivers installing

Please install on the PC the USB drivers. The drivers can be downloaded from

www.adrel.com.pl/download

- file Altimetr_Program.zip and unzip tem to any folder.

For versions lower than programs 07.2010, you must copy the files from the folder

…/Sterowniki_Builder/ to folder …/windows/system32. They are files: “tee35.bpl” and
“vcl35.bpl”. For versions of 7.2010 and above there is no need to copy these files.

Then connect the altimeter to the computer via

adapter  or  cable  with  a  5-pin  tip  (described  above).
For  the  connection  additional  hubs  can  not  be  used.
Altimeter  must  be  connected  via  a  USB  cable  AB
type  with  plugs  directly  into the  computer.  Windows
automatically  detects  the  connected  device.  On  the
screen  Found  New  Hardware  Wizard  will  appear.
Select "Not this time" and press "Next".

Then select "Install from a list or specific

location" and press "Next".

Now,  select  "Include  this  location  in  search"  and
press "Browse".

Find the  folder where  you previously unpacked the
downloaded  drivers.  Select  the  directory  of  the
driver, depending on the system:

«
...
2
3
4
5
6
...
»

Содержание ALT-USB












Отзывы:

Нет отзывов