ADOS S.R.L. Buccinasco (MI)
1513-MPTB13ME
Rev. 0
Pag. 5 di 12
1.7
Baud rate selection
To configure the speed of the serial line open the case unscrewing the eight external screws, turn
down the top part of the case.
The programming operation is performed by the four keys places on the CPU board.
ENT
DEC
ESC
INC
to access baud rate configuration press
ENT
C O N F
press
ENT
again to access the configuration parameter or press
ESC
to cancel
B A U D
the name of parameter will appear on the display
once the required parameter has been identified, modification can be made by pressing
ENT
B A U D
9 6 0 0
the parameter value will appear on the display and the name of the parameter will flash
intermittently
use the
INC
and
DEC
keys to change the parameter value (press the key for more than 3
seconds to activate the automatic repetition option)
press
ENT
to confirm the set value or press
ESC
to cancel
