Double Sided
Louvered Pad Frame Design
Arctic Circle has over 50 years of experience in designing
evaporative coolers for commercial, industrial and agricultural
applications. We’ve designed this special pad frame to assure
that water stays where it is supposed to be — in the pad! Both
the external and internal louvers constantly direct water into the
pad, and away from the air stream.
Certified Air Delivery CFM At Various External Static Pressures
Inches Water Gauge
AMCA Licensed Ratings
• Performance shown is for installation type B: Free inlet
Ducted outlet.
• Performance ratings include the effect of evaporative media
in the airstream.
• Power rating (BHP) does not include drive loses.
11,000
9,500
7,400
17,000 15,100 12,800
All external wiring and components such as disconnects, motor starters, and over-current
protection are to be field supplied and are not included as part of the evaporative cooler from the
factory.
A separate 120 volt, 60 hertz, 1-phase pump electrical circuit is required to maintain the
integrity of the GFCI pump protection and to maintain the U.L. listing of the evaporative cooler.
120V/60Hz/1Ph
Nameplate
Fan
Voltage
Motor
Pump
Model
HP
BHp
RPM
(60Hz) Phase Amperage
Amperage
0.0”
0.1”
0.2”
AFD4242 C110A
3/4
.76
510
120
1
10.5
1.2
AFD4242 C210A
3/4
.76
510
240
1
5.3
1.2
AFD4242 C230A
3/4
.76
510
208/240
3
3.0
1.2
AFD4242 C430A
3/4
.76
510
480
3
1.5
1.2
AFD4262 E110A
1-1/2
1.34
510
120
1
14.5
1.2
AFD4262 E210A
1-1/2
1.34
510
240
1
6.3
1.2
AFD4262 E230A
1-1/2
1.34
510
208/240
3
4.6
1.2
AFD4262 E430A
1-1/2
1.34
510
480
3
2.2
1.2
Complete Packaged System
With Motor And Pump Pre-wired
With an Arctic Circle High Capacity Evaporative Cooler you get a
complete system, with factory installed motor and circulating
pump that have all internal wiring complete. The separate pump
circuit is GFCI protected for safety, and all internal wiring is in
water tight conduit to a weatherproof junction box.
Water Trough
External
Louvers
Internal
Louvers
Aspen
Pad
1
2
1
2
