Admiral ADM6026-002, Инструкция по эксплуатации

Страница: 6 / 24

PRODUCT OVERVIEW
CD AC Input
@
Display
...,
® Balance port
® USB output port/firmware upgrade port
®
Battery Output
� - ��- - - - - -®-®button
INSTRUCTION
Connect the charger to the power supply. The LOGO will display for about 2
seconds before entering Charger mode.
The top level menu is divided into 3 functions. By pr/- buttons, the
user may select between charge mode, battery check mode, and system
setting mode.
H01 LiHU STORAGE
5, 0A 11. 4U (35)
PROGRAM SELECT
LI BATT METER
PROGRAM SELECT
SYSTEM SET->
Menu Descripition:
(1) Memory selection (2) Battery chemistry selection
(3) Operating mode selection (4) Amperage setting
(5) Battery Voltage/cell count selection.
Menu Descripition:
(1) Battery pack voltage, (2) Single cell voltage readings
for pack, (3)Battery pack voltage and highest/lowest cell
voltage in pack
Menu Descripition:
(1) Safety timer setting (2)Version Information (3)Test
mode (4)Sound setting (5) Cutoff capacity
1. Operating mode settings
The charger supports 4 different battery chemistries: LiPo, LiHV, LiFe and NiMH
The charger supports 4 different modes:
CHARGE=Balance Charge
STORAGE= Storage
Remarks:
CellBAL = Cell balancing
DISCHG = Discharge
The balance charge mode is a synchronized charging and balancing process. In this mode,
a battery
will
be balanced and charged to a preset cutoff voltage.
The Cell Balancing mode of this charger is used to equalize voltage difference of a multiple
cell battery. In this mode, if the voltage is lower than 4.05V per cell of a LiPo battery, or 3.35V
of a Li Fe battery, the charger will balance the cell voltage and charge the battery to
4.05V(Lipo) and 3.35V(LiFe). Otherwise, If the voltage is over than 4.05V per cell of a Li Po
battery, or 3.35V of a Li Fe battery,the charger will enter balance the cells only without
charging to be full.
ADMIRALAC100 06